Please perform a Complete System Reset
Communications issue may involve a locked Ethernet switch in the display or the head stand. To unlock an Ethernet
switch, perform a complete system restart using the steps below.
Power Down Sequence
- Display:
If the system is not communicating, a System Shutdown is not possible: disconnect AC power from the AC adapter. - Pod:
To power down the Pod (if present), disconnect AC power from the Pod power supply. - SRU (Head Stand):
To power down the SRU, switch the SRU Power Supply off - Wait approximately 10 seconds before powering up again
Power Up Sequence:
- SRU (Head Stand):
Reconnect AC power to the SRU Power Supply. Switch the supply on. The lights on the head should come on. - Pod:
– Reconnect AC power to the Pod Power Supply /if present). The Pod Power LED should glow solid amber.
– Press the Pod power button until the LED is solid green. - Display:
Press the power switch (or reconnect AC power to the AC adapter).
If the communication issues continue, please chat with the Bayer representative in order to organize an intervention on site